Battioni Pagani Slurry Vacuum Pump Standard MEC8000M

Details
Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
A test report relating to the serial number is drawn up for each pump
 
Application range
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
 
Properties
These pumps can generate both positive pressure and vacuum
Oil to be used for lubricating the vanes: genuine oil from B. P. Item number: BP5070
 
Technical info
Composition of the item numbers: MEC = series, 8000 = type, M = indirect drive 540 rpm, A = automatic lubrication
On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
Pumps with indirect drive (M) must be driven anti-clockwise
The direction of rotation is determined when the axle to be driven is aligned with the observer
If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
 
Benefits
As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
 
Nominal volume flow rate
8100 l/min
 
Drive type
PTO 540 rpm
 
Direction of rotation
Counter-clockwise (CCW)
 
Ballast air injection system
No
 
Consists of
These pumps are supplied with standard vanes ("Long-life" vanes available on request)
Without pressure relief valve and vacuum valve
The pumps are delivered without lubrication oil (BP5070)
Including PTO shaft cover
 
Lubrication system type
Forced
 
Vane type
Standard
 
Crash protection system
No
 
Max vacuum
0.9 BAR
 
Max. relative pressure
1.5 BAR
 
Power requirement for max. pressure
27 kW
 
Power requirement for max. vacuum
16 kW
 
Diameter of hose connection
80 mm
 
Safety valve connection diameter
1-1/2 Inch
 
Total length
773 mm
 
Total width
410 mm
 
Height
637 mm
 
Mounting holes diameter
15 mm
 
Mounting holes distance
252 mm
227 mm
 
Mounting holes to shaft end distance
316 mm
 
Mounting holes to end distance
170 mm
 
Shaft centre to left side end distance
195 mm
 
Shaft centre to right side end distance
215 mm
 
Shaft diameter
1-3/8 Inch
 
Max. shaft rotation
600 r/min
 
Weight
162 kg