Battioni Pagani Slurry Vacuum Pump Standard MEC8000H Hydraulic Drive

Details
Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
A test report relating to the serial number is drawn up for each pump
 
Application range
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
 
Properties
These pumps can generate both positive pressure and vacuum
 
Technical info
Composition of the part numbers: MEC = series, 8000 = type, H = hydraulic drive
On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles Automatic lubrication available on request
On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
Hydraulically driven pumps rotate clockwise. Anti-clockwise rotation available on request
The direction of rotation is determined when the axle to be driven is aligned with the observer
Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
 
 
Benefits
As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
 
Nominal volume flow rate
8100 l/min
 
Drive type
Hydraulic
 
Direction of rotation
Clockwise (CW)
 
Ballast air injection system
No
 
Consists of
These pumps are supplied with standard vanes. Long-life vanes available on request
Without pressure relief valve and vacuum valve
The pumps are delivered without lubrication oil (item BP5070)
Including hydraulic base for mounting the hydraulic motor
Without hydraulic motor and key bush
 
Lubrication system type
Forced
 
Vane type
Standard
 
Crash protection system
No
 
Max vacuum
0.9 BAR
 
Max. relative pressure
1.5 BAR
 
Power requirement for max. pressure
22 kW
 
Power requirement for max. vacuum
15 kW
 
Hydraulic motor required capacity
63.5 l/min
 
DDiameter of hose connection
80 mm
 
Safety valve connection diameter
1-1/2 Inch
 
ATotal length
735 mm
 
BTotal width
410 mm
 
CHeight
597 mm
 
HMounting holes diameter
15 mm
 
IMounting holes distance
227 mm
252 mm
 
EMounting holes to shaft end distance
287 mm
 
GMounting holes to end distance
196 mm
 
KShaft centre to left side end distance
195 mm
 
XShaft centre to right side end distance
215 mm
 
LShaft centre to bottom distance
164 mm
 
Max. shaft rotation
1400 r/min
 
Weight
153 kg