XPB1320 V-Belt Notched Wedge Belt V Belt 16.3mm Wide 1320mm Long
XPB1320 V-Belt Notched Wedge Belt V Belt 16.3mm Wide 1320mm Long
- 16.3mm Wide across the top
- 13mm deep on the section
- 1320mm Long
- Suits some Proforge Flail Mowers
Moulded Cog or Raw-edge V-belts have higher capacity and efficiency and they use smaller pulleys than traditional envelope (wrapped) belts. These belts have a higher coefficient of friction and are more aggressive, which makes them a very efficient belt for power transmission Unlike conventional fabric-covered V-belts, raw-edge belts have no cover. Thus, the cross-sectional area normally occupied by the cover is used for more load-carrying cord. Cogs on the inner surface of the belt increase air flow to enhance cooler running. They also increase flexibility, allowing the belt to operate with smaller pulleys.
- Buy 2+ £22.07 £18.39 Ex. VAT
- Buy 4+ £20.63 £17.19 Ex. VAT
XPB1320 V-Belt Notched Wedge Belt V Belt 16.3mm Wide 1320mm Long
- 16.3mm Wide across the top
- 13mm deep on the section
- 1320mm Long
- Suits some Proforge Flail Mowers
Moulded Cog or Raw-edge V-belts have higher capacity and efficiency and they use smaller pulleys than traditional envelope (wrapped) belts. These belts have a higher coefficient of friction and are more aggressive, which makes them a very efficient belt for power transmission Unlike conventional fabric-covered V-belts, raw-edge belts have no cover. Thus, the cross-sectional area normally occupied by the cover is used for more load-carrying cord. Cogs on the inner surface of the belt increase air flow to enhance cooler running. They also increase flexibility, allowing the belt to operate with smaller pulleys.
