V-TUF RAPID MSH 240v Professional Hot Water Industrial Mobile Pressure Washer - 120Bar, 9L/min
SKU
HA504319
V-TUF RAPID MSH 240v
Professional Hot Water Industrial Mobile Pressure Washer
120Bar, 9L/min
£3,007.36
£2,506.13
Ex. VAT
V-TUF RAPID MSH 240v
Professional Hot Water Industrial Mobile Pressure Washer
120Bar, 9L/min
Features:
- 20Bar Operating Pressure, 9L/min (540Litres/hour) flow rate
- Heats Water to 90oC on full pressure and up to 150oC on steam stage
- Easy to Use / Easy to Transport with low centre of gravity for stability.
- Boiler Protection Against Low Water Pressure.
- Total Stop System - Saves electricity • Fully stainless steel frame and cover - Built to last
- Simple Adjustable Temperature Control & Switch.
- Double Pass Heat Exchanger Guarantees Hotter Water with Less Fuel Usage.
- Fully Protected Electrics from Water Ingress
- Can be used with HVO fuel which reduces greenhouse gas emissions by 90%
- 4L Easy Fill Fuel Tank
The V-TUF RAPID-MSH 240v Hot-Water Heavy-Duty Pressure Washer is popular for cleaning tasks tackling large amounts of grease, oil, dirt, or stubborn dirt. The RAPID-MSH steam cleaner swiftly lifts all deep-rooted thick sludge, dirt, and grime from all hard surfaces. Recommended usage 3 Hours Per Day.
With a solid steel chassis, and stainless-steel cover, the RAPIDMSH Industrial Mobile Pressure Washer is rugged, durable, compact, which is why contract cleaners enjoy using this machine for use in all industries, including; Agriculture, Industry, Automotive, Transport, Construction & Public Services.
Why Buy?:
• Superb Cleaning Performance.
• Thermostat - Full Control of Temperature.
• Minimal Long-Term Maintenance.
• Energy Efficient & Low On Emissions.
• Superb Cleaning Performance.
• Thermostat - Full Control of Temperature.
• Minimal Long-Term Maintenance.
• Energy Efficient & Low On Emissions.
• Simple Electric Circuits
The V-TUF RAPID-MSH hot water electric pressure washer offers a time saving of up to 35% with drastically improved cleaning results compared to a cold-water model. Cleaning using hot water offers optimises the cleaning process by allowing you to use less chemical, as well as impressive cleaning results.
Oils & Greases are known to be hard to clean, especially in food factories, but using Hot water softens congealed oil and grease and radically improves emulsification, making it very easy to efficiently remove, clean, and sanitise.
Hot-Water Cleaning Removes Grime & Grease Quicker Than An Equivalent Cold-Water Machine With the same pressure and flow rate - With Quicker Drying Time.
Features:
• The pump is lubricated with top specification V-TUF PRESSURE LUBE which contains MSM which virtually eliminates friction and wear. Pump lube level visible from outside the machine.
• Pressure can be regulated and the regulation wheel is direct on the pump and easy to reach.
• Adjustable temperature control and cold water switch.
• High efficiency double pass heat exchanger offers you hotter water while using less fuel and clean combustion.
• The simple strategically placed control panel is easy to operate and has IP56 electric protection.
• Manual start stop for better control.
• Low water burner Cut-Out - reducing expensive damage from water shortage.
• Safety pressure valve: visible and direct on the pump (following all European regulations).
• Lance storage holder on the side of the cover.
• Mechanical Fuel pump.
• 4 x large robust wheels – ideal for rough terrain
• Quick release KTQ 350 bar Optigun lance system with 10m 3/8 Jetwash High Pressure Hose DuraKlix coupling system.
• Chemical injection system.
• 2800 RPM Industrial Motor with Thermal Protection.
• 24 Litre Easy-Fill Removable Fuel Tank.
• Minimal Long-Term Maintenance & Running Costs.
• 24 Litre Easy-Fill Removable Fuel Tank.
• Minimal Long-Term Maintenance & Running Costs.
Technical Specifications:
FUEL TANK CAPACITY
- 24 Litres for Boiler - Removable tank
POWERED BY
- 240v (13Amp 3-Pin UK Plug)
MODEL
- RAPID MSH - Hot
HIGHER the L/MIN & PUMP TYPE = FASTER CLEANING
- 9 Litres/Minute (540 Litres/Hour)
WATER SUPPLY TYPE
- Mains feed
Operating Pressure
- 120 Bar / 12Mpa / 1770 psi
ENGINE / MOTOR SIZE (HP / KW)
- 2.9HP (2.1KW) ELECTRIC 240V (2800RPM)
Hot / Cold Water
- Hot & Cold Water
MAX. TEMPERATURE OUTPUT (ADJUSTABLE) (°C)
- 40oC - 150oC / 90oF – 370oF
Sound Level (dB(A))
- 90 dBA
CHEMICAL APPLICATION
- Yes
Power Cable
- 5m
Accessories Included
- 10m High Pressure Steam Cleaner Hose & Quick Release Lance & Vario Nozzle Kit
Warranty
- 12 Months
Product Dimensions
- Box: (H) 800 x (W) 1200 x (D) 800mm
- Washer: (H) 720 x (W) 620 x (D) 1000mm
Weight
- Nett: 100kg / Gross: 110kg