Bare-Co Universal PTO Powershaft Guard (Range Of Sizes)

SKU
PTO1

Condition: New

To determine the length of guard required, measure from yoke bearing groove to yoke bearing groove at either end of the PTO shaft. All guards are easy to cut to length.

To determine if you require a small or large diameter guard, measure the yoke bearing groove diameter. The smaller diameter guards fit shafts with a yoke bearing groove diameter 32mm to 53mm; larger diameter guards fit shafts with a yoke bearing groove diameter 53mm to 83mm. (See images for a guide where to measure)

  • Small - Suits yoke bearing groove diameters 32mm to 53mm, bearings to fit A2 & A3
  • Large - Suits yoke bearing groove diameters 53mm to 60mm to 80mm, bearings to fit A4-A8
All guards are supplied complete with collar, centre tubes, safety chains and a full set of bearings.
 
The BARE-Co Patented Lever Release PTO Guard can be unclipped from its bearing point at the yoke end which allows for guards to be pulled back to facilitate safe engagement of PTO shaft yokes and regular joint maintenance.
Small 1370mm L PTO Guard for A2 to A3 PTO Shafts  Small 1370mm L PTO Guard for A2 to A3 PTO Shafts
From £78.24 £65.20 Ex. VAT
Sku: PA300041
Available For Delivery
In Stock At Bourne
Available On Request At Thaxted
  • Buy 2+ £70.42 £58.68 Ex. VAT
  • Buy 3+ £62.90 £52.42 Ex. VAT
Large 1370mm L PTO Guard for A4 to A8 PTO Shafts Large 1370mm L PTO Guard for A4 to A8 PTO Shafts
From £165.92 £138.27 Ex. VAT
Sku: PA300042
Available For Delivery
In Stock At Bourne
Available On Request At Thaxted
  • Buy 2+ £132.72 £110.60 Ex. VAT
  • Buy 3+ £110.38 £91.98 Ex. VAT
XLarge 2000mm L PTO Guard for A4 to A8 PTO Shafts XLarge 2000mm L PTO Guard for A4 to A8 PTO Shafts
From £165.92 £138.27 Ex. VAT
Sku: PA302378
Available For Delivery
In Stock At Bourne
In Stock At Thaxted
  • Buy 2+ £132.72 £110.60 Ex. VAT
  • Buy 3+ £110.38 £91.98 Ex. VAT

Bare-Co Universal PTO Powershaft Guard (Range Of Sizes)

To determine the length of guard required, measure from yoke bearing groove to yoke bearing groove at either end of the PTO shaft. All guards are easy to cut to length.

To determine if you require a small or large diameter guard, measure the yoke bearing groove diameter. The smaller diameter guards fit shafts with a yoke bearing groove diameter 32mm to 53mm; larger diameter guards fit shafts with a yoke bearing groove diameter 53mm to 83mm.

  • Small - Suits yoke bearing groove diameters 32mm to 53mm, bearings to fit A2 & A3
  • Large - Suits yoke bearing groove diameters 53mm to 60mm to 80mm, bearings to fit A4-A8
All guards are supplied complete with collar, centre tubes, safety chains and a full set of bearings.
 
The BARE-Co Patented Lever Release PTO Guard can be unclipped from its bearing point at the yoke end which allows for guards to be pulled back to facilitate safe engagement of PTO shaft yokes and regular joint maintenance.
 
BARE-Co PTO Guards are claimed to be the most user friendly PTO guard in the world. Just two diameters cover virtually every brand of shaft sold in Europe.
 
Reusable. Easy Re-Greasing. Safe. UV Resistant. Hard Wearing.
 
Approvals: C.E. Approved, ISO 5674, ISO 12100, BS 12965.
 
Small Bare Co PTO Guards will fit the following series PTO Shafts;
Walterscheid - up to Series W2100
Bondioli (BYPY) - up to Series 4 with Triangular Profile Tubing (Global Series)
Comer - up to Series T40
Weasler - up to Series AB4
La Magdalena - up to Series 05
 
Large Bare Co PTO Guards will fit the following series PTO Shafts;
Walterscheid - Series W2300S to W2600-25
Bondioli (BYPY) - Series 5-8 with Triangular Profile Tubing (World / Global Series)
Comer - Series T50 to T90
Weasler - Series 5 to 8
La Magdalena - Series 06 to 09