PROFORGE Combi Bale Grab Vertical Stack Mover for Round/Square Bales
SKU
MN101622
PROFORGE Combi Bale Grab Vertical Stack Mover for Round/Square Bales
The Combi Big Bale Grab/Handler is intended for square & round bales with or without wrap, and comes with 2 sets of Clamp Arms - Spikes and Soft Hands
Bolt-on Euro Brackets included as standard. Other weld - on brackets available (not fitted)
The Combi Bale Grab with Spikes:
- Suitable for square and round bales
- Minimum round bale diameter ready for handling: 800mm
- Two symmetric bale grab arms are 1620mm in height with each carrying four cold-bent spikes spaced every 500mm
- The folding bottom fork features two straight 1100mm long spikes with a spacing of 725mm
- Can be operated with the bottom spikes folded out or away
- Overall height: 1800mm
- Width unfolded: 1750 mm - Gap between spikes when open 1746mm
- Weight: 330kg
- SWL: 1200kg
The Combi Bale Grab with Soft Hands:
- Intended for round bales wrapped in plastic film. The bottom forks do not have to be removed: just fold them in so they will not strike the handled bales.
- Bale grab arm opening widths: Widest opening width of 2800mm; the opening width can be reduced to 1652mm with lock pins as required for the job.
- Two symmetric bale grab arms are 1144mm in height and 960mm long and made from 48.3mm diameter tubes
- Overall height: 1715mm
- Maximum length: 1300mm
- Weight: 323kg
- SWL: 800kg
£2,850.00
£2,375.00
Ex. VAT
PROFORGE Combi Bale Grab Vertical Stack Mover for Round/Square Bales
The Combi Big Bale Grab/Handler is intended for square & round bales with or without wrap, and comes with 2 sets of Clamp Arms - Spikes and Soft Hands
Bolt-on Euro Brackets included as standard. Other weld - on brackets available (not fitted)
The Combi Bale Grab with Spikes:
- Suitable for square and round bales
- Minimum round bale diameter ready for handling: 800mm
- Two symmetric bale grab arms are 1620mm in height with each carrying four cold-bent spikes spaced every 500mm
- The folding bottom fork features two straight 1100mm long spikes with a spacing of 725mm
- Can be operated with the bottom spikes folded out or away
- Overall height: 1800mm
- Width unfolded: 1750 mm - Gap between spikes when open 1746mm
- Weight: 330kg
- SWL: 1200kg
The Combi Bale Grab with Soft Hands:
- Intended for round bales wrapped in plastic film. The bottom forks do not have to be removed: just fold them in so they will not strike the handled bales.
- Bale grab arm opening widths: Widest opening width of 2800mm; the opening width can be reduced to 1652mm with lock pins as required for the job.
- Two symmetric bale grab arms are 1144mm in height and 960mm long and made from 48.3mm diameter tubes
- Overall height: 1715mm
- Maximum length: 1300mm
- Weight: 323kg
- SWL: 800kg