MOORE UNIDRILL 3.4 metre Direct Drill, New, 36 row, UK Built !
Condition: New
MOORE UNIDRILL 3.4 metre Direct Drill, New, The Original and still the Best
- Accord Metering,
- 28 row also available in 3.4 metre, or 24 & 32 row in 3 Metre
- 3.4 metre Fits with 24 metre Tramlines if applicable
- 410mm Notched disc
- Guttler Rear packer - Hyd Adjustment for Depth Control
- Infinitely Adjustable Tungsten Tip Coulter - can be adjusted for deeper/shallower disc cut or as the Disc Wears
- Can also be purchased without the Hopper, ready for you to mount an alternative seed hopper, or for you to feed from a front hopper.
- Optional RDS Tramlining (2 + 2) with integrated Low Level Hopper and Fan Speed Sensors
- Optional Hyd Drive Fan instead of PTO
- Optional 600kg Frame weights
- Optional Hydraullic Bout Marker Kit, Vertical Lift
- Optional 500 Litre Hopper Extension - increases Hopper Capacity by 60% to 1350 litres
- Optional Low Level Hopper Sensor
- Optional Wired CCTV Hopper Camera
- Trailed Model available in 3 metre
- UK Design & Built
- Proven High Residual Value with Very High Demand for Used Models - Wise Investment!
- Watch Sam Moore Video Explainer Tour Round the Moore Unidrill and its options on this link
The MOORE UNIDRILL is suitable for sowing grass & cover crops including cereals, oilseed and pulses, etc. – the narrow row spacing also makes the same machine a very good overseeder into existing grass surfaces.
Qualifies for significant Grants in some areas of the UK - many recently sold on this scheme
Eligible for Grant Funding Support - Item No FETF44 - see Link to information on .Gov website here
For more options go to our Direct Drills page.
Specification & Prices quoted are for this region only (England East Midlands) and are Ex-works Net Prices. Specification, Transport/Shipping, Packing and Customs charges for other regions will vary and impact prices significantly. Please check with your Regional Distributor (see here for contact details) for pricing in your area.
MOORE UNIDRILL 3.4 metre Direct Drill, New, The Original and still the Best
- Accord Metering,
- 28 row also available in 3.4 metre, or 24 & 32 row in 3 Metre
- 3.4 metre Fits with 24 metre Tramlines if applicable
- 410mm Notched disc
- Guttler Rear packer - Hyd Adjustment for Depth Control
- Infinitely Adjustable Tungsten Tip Coulter - can be adjusted for deeper/shallower disc cut or as the Disc Wears
- Can also be purchased without the Hopper, ready for you to mount an alternative seed hopper, or for you to feed from a front hopper.
- Optional RDS Tramlining (2 + 2) with integrated Low Level Hopper and Fan Speed Sensors
- Optional Hyd Drive Fan instead of PTO
- Optional 600kg Frame weights
- Optional Hydraullic Bout Marker Kit, Vertical Lift
- Optional 500 Litre Hopper Extension - increases Hopper Capacity by 60% to 1350 litres
- Optional Low Level Hopper Sensor
- Optional Wired CCTV Hopper Camera
- Trailed Model available in 3 metre
- UK Design & Built
- Proven High Residual Value with Very High Demand for Used Models - Wise Investment!
- Watch Sam Moore Video Explainer Tour Round the Moore Unidrill and its options on this link
The MOORE UNIDRILL is suitable for sowing grass & cover crops including cereals, oilseed and pulses, etc. – the narrow row spacing also makes the same machine a very good overseeder into existing grass surfaces.
Qualifies for significant Grants in some areas of the UK - many recently sold on this scheme
Eligible for Grant Funding Support - Item No FETF44 - see Link to information on .Gov website here
For more options go to our Direct Drills page.
Specification & Prices quoted are for this region only (England East Midlands) and are Ex-works Net Prices. Specification, Transport/Shipping, Packing and Customs charges for other regions will vary and impact prices significantly. Please check with your Regional Distributor (see here for contact details) for pricing in your area.