CHAIN HARROW 1.2 metre to 2.4 metre on Trailing Pole - Flexible Paddock Harrow Complete With Towing Pole (4ft, 5ft, 6ft & 8ft) - New

SKU
MNCHAINHARROWT

Condition: New

William Hackett - Trailed Chain Harrows

Made in England - Since 1892

Widths - 4ft, 5ft, 6ft and 8ft

All widths are 5ft Deep and come with a Tow Pole

Suitable to tow with a Quad bike, Tractor or 4x4 Vehicle

Come Flat-Packed for Distribution Purposes

4ft Flexible Paddock Chain Harrow with Tow Pole 4ft Flexible Paddock Chain Harrow with Tow Pole
£412.80 £344.00 Ex. VAT
Sku: MN100255
5ft Flexible Paddock Chain Harrow with Tow Pole 5ft Flexible Paddock Chain Harrow with Tow Pole
£517.20 £431.00 Ex. VAT
Sku: MN100256
6ft Flexible Paddock Chain Harrow with Tow Pole 6ft Flexible Paddock Chain Harrow with Tow Pole
£654.00 £545.00 Ex. VAT
Sku: MN100257
8ft Flexible Paddock Chain Harrow with Tow Pole 8ft Flexible Paddock Chain Harrow with Tow Pole
£838.80 £699.00 Ex. VAT
Sku: MN100258

William Hackett - Trailed Chain Harrows

Made in England - Since 1892

Widths - 4ft, 5ft, 6ft and 8ft

All widths are 5ft Deep and come with a Tow Pole

Suitable to tow with a Quad bike, Tractor or 4x4 Vehicle

Come Flat-Packed for Distribution Purposes

This Trailed Chain Harrow is made in England using 13mm diameter heat treated steel. The grass or chain harrow is the most efficient and cheapest piece of equipment available for the improvement of grassland, it encourages the germination of new growth, whilst controlling weeds.  It can be used in the following ways:-

1) Tines facing upwards for the gentle levelling of seedbeds and equestrian exercise areas and gravel driveways.

2) Tines facing down and to the rear for light harrowing of new growth and de-thatching lawn type grass.

3) Tines facing down and forward for a more aggressive levelling effect, the improvement of meadows, the removal of dead grass and weeds and to encourage new growth through tillering.

The performance of this trailed chain harrow will be greatly improved if you attach small trailed weights behind the harrows. This prevents the harrow from bouncing in the air and adds tension and weight to the bed, which will improve the penetration and make a better harrow job. You can use one on each section or just one on each rear corner.  This is achieved by using the optional trailed weights, which are made from the same type of heat treated steel as the harrows,  even using a home made weight will help.